Quote:
Originally Posted by Wombat
Good to know. My alternator is still the original so it has seen better days. I have a voltmeter on my amp and it has dropped down to 12.2 volts at times so I'm kind of scared what will happen when I put the touchscreen and PC in 
I also have that accessory cable plugged into my M2-ATX...just never used my voltmeter on it to see what it outputs when it is turned on.
For hibernation mode, I know you have to enable it in windows, but is there anything special you need to do to the M2-ATX to tell the PC to hibernate or does it do that by itself? |
You need to configure the M2 with the jumpers...check the manual, I havent done it in over a year.
Keep a volt gauge installed. I use(d) the NEO, and see always high 12v into 13v readings. I removed the NEO so installing a digital 52mm gauge now. I'm on the stock alternator also (far as i know).