View Single Post
Old 03-06-2008, 03:03 PM   #21 (permalink)
nduda78
Forum Member
 
nduda78's Avatar
 
Join Date: Apr 2005
Location: Boston, MA
Drives: 96 VR4
Trader Rating: (14)
nduda78 Level 1nduda78 Level 1
Default Re: My carPC project: ongoing thread

Quote:
Originally Posted by Wombat View Post
Closer pictures would be awesome! I was thinking of going with the SB 24-bit as well, but wanted to see what the mobo soundcard could do in the meantime.

I purchased some ground loop isolators to hopefully get rid of all static (I had a ton of noise with my head unit). I also bought a power distribution block to power all of my equipment. I have two 4 gauge power wires coming directly from my optima battery so I should have more than enough juice to power it all. I just worry about my alternator when my lights are on, my heater is cranked and I'm sitting idle at a stoplight

I also plan on using the M2-ATX to send the remote power signal to my amplifiers, but I was reading somewhere that you need to connect a relay in between. Did you have to do this?
I didnt use a relay. I have my PC rigged up to accessory power to toggle on the M2....basically when I turn my car on (accessory or start) the carPC starts up and comes out of hibernation. When i kill the power the M2 does its thing and keeps power to it enough for the PC to hibernate.

I've sat at lights, heat on, music cranked and never had a power problem, and I draw a lot of power.
__________________

Maximum Power: 417.2 @ 5812RPM / 91.1MPH @ 18PSI (Mustang Dyno)
Maximum Torque: 440.7 @ 3615 RPM / 57.3MPH @ 18PSI (Mustang Dyno)
Best Track time: 12.211 @ 119.45 (NE Dragway) but not for long!
WPI:Import Best Show | April 2008 ROTM | Import Wars 2008 2nd Place: Best Mitsu Show
Aftershock 2008 1st Place: Best Mitsu Show | Summer Meltdown: 2nd Place: Best Mitsu Show
nduda78 is offline   Reply With Quote
Sponsored Links
Advertisement