3000GT/Stealth International Message Center - View Single Post

kmartens · 03-03-2008, 04:49 PM

I seem to keep overboosting with my GM Typhoon Boost solenoid. I have the silver nipple on the solenoid going to the y-pipe and the black nipple (on the side with the foam covered nipple) going to the WG's. Is this hooked up properly? Otherwise it's an issue with my AEM config. My Boost Control options are set to:

W/G output "checked"
Boost from Load "checked"
W/G invert "checked"
Freq. = 31Hz (I Heard this should be set to 19.5 Hz with the GM Soleniod True/false?)
Idle pw TPS = 25%
Boost duty max = 85%
Boost Duty Min = 10%
Fuel Cut Load = 14 PSI

No matter what my Base WG Duty map is set to (I've tried 0,10, 30, 80, and 100), I see my fuel cut @ 14 PSI. I want to only run about 6PSI until I figure out the AEM a little better. Anyone know what is causing this?

I had Penguins send me map but I'm trying to figure out what I was doing wrong. He seems to have the WG invert unchecked and the duty map to 99.6. Is the invert option what was causing me to overboost?

03-03-2008, 04:49 PM	#1112 (permalink)
kmartens New User - Please be kind Join Date: Nov 2007 Location: Olathe, KS Drives: 97 3000gt VR-4 Trader Rating: (0)	Re: AEM Ultimate Resource Thread>>>> I seem to keep overboosting with my GM Typhoon Boost solenoid. I have the silver nipple on the solenoid going to the y-pipe and the black nipple (on the side with the foam covered nipple) going to the WG's. Is this hooked up properly? Otherwise it's an issue with my AEM config. My Boost Control options are set to: W/G output "checked" Boost from Load "checked" W/G invert "checked" Freq. = 31Hz (I Heard this should be set to 19.5 Hz with the GM Soleniod True/false?) Idle pw TPS = 25% Boost duty max = 85% Boost Duty Min = 10% Fuel Cut Load = 14 PSI No matter what my Base WG Duty map is set to (I've tried 0,10, 30, 80, and 100), I see my fuel cut @ 14 PSI. I want to only run about 6PSI until I figure out the AEM a little better. Anyone know what is causing this? I had Penguins send me map but I'm trying to figure out what I was doing wrong. He seems to have the WG invert unchecked and the duty map to 99.6. Is the invert option what was causing me to overboost?