[Davey07]

AEM map sensors:
The black MAP sensor wire can be t'd into the black tps wire (ground). The green wire goes to the ECU EGR pin for your model year (53 or 73). The red wire can be t'd into the green/yellow striped tps wire (+5v). The vampire taps shown below are NOT recommended but are only shown for example purposes (in this case when the aem was just being tested and then removed).


Question the green wire where exactly does that go? run a wire through my firewall or what?? understand everything cept that wire.. thanks guys Dave, oh and if i took off my egr do i even need to do anything with this wire.??