Quote:
Originally Posted by dlabonte
Just need to enter your estimated FWHP.
|
I'm assuming this means Flywheel Horsepower?
Quote:
Originally Posted by dlabonte
Second part of calibration is the initial Gain setting on the Monitor screen. Once installed use the Peak mode to capture your Max IDC, for example from a third gear pull.
If your max IDC is say 85, initial Gain is (80-85) = -5. If your max IDC is 60, initial Gain is (80 - 60) = +20.
|
Does this mean once we have the unit installed, we need to take a WOT pull so it can measure our peak IDC's? Or should we know our peak IDC before installing the unit for the calibration input?
Quote:
Originally Posted by dlabonte
Tell it the exact nozzle you have installed. If it is an M6 or M8, does not matter, the system knows the flow rates of the nozzles and will automatically adjust. .
|
What if you have multiple nozzles? For instance, (4) M3 nozzles? What do you input then?
Thanks Dan
Brian