3000GT/Stealth International Message Center - View Single Post - MAFT Gen 2

josevr4 · 02-16-2008, 03:41 PM

Heres my setup. I teed off the front and rear crank case to the vacuum source under the intake mani. i got all my settings in user tune starting at+9 and then changing all the way up to -8% on all my Loads. Mainscale i have set to 0. I now spool my weebit 9bs at 2400ish rpm.

Photo-0003[1].JPG And heres my setup

0001.jpg

02-16-2008, 03:41 PM	#134 (permalink)
josevr4 Killer Whale Join Date: Jun 2007 Location: bakersfield cali Drives: like my mother Trader Rating: (4)	Re: MAFT Gen 2 - Anyone? Heres my setup. I teed off the front and rear crank case to the vacuum source under the intake mani. i got all my settings in user tune starting at+9 and then changing all the way up to -8% on all my Loads. Mainscale i have set to 0. I now spool my weebit 9bs at 2400ish rpm. Photo-0003[1].JPG And heres my setup 0001.jpg __________________ [/SIGPIC] Dejon dual intakes and Ypipe, Synapse B.O.V., Gen2 Maft w/3.5" sensor(blowthru), RandomTech Cat,3SXdownpipe,Ips singletip exhaust, Maximal solid motormounts,13T's,Gtpro headers(powdercoated) w/precat elims,Supra Fuelpump,550cc's,AEM Fpr,IPS hotwire kit,AEM AFR guage,Newvolt ignition amp,IK27 plugs, Southbend DXD-FE clutch,Fidanza flywheel,SSclutch line,300M output shaft. 289awhp and 298awtq on stock boost @11.3AFRlimited by bad VSS's on stock sidemounts Next ported heads and bigger intercoolers