Quote:
Originally Posted by twinturbvr4
I'm soon going blow-through, as you could tell, I just changed my PCV valve a few weeks ago, what should I be on the look out for here? I was thinking of just putting breathers where the vent to intake pipes were..
|
that will work. you just need to richen the idle some.
DSM guys and guys with really worn out engines have been known to drill out their PCV valves to increase scavenging of the blow-by. In a blow-thru setup this adds additional 'vacuum leak' flow. So, just use a stock PCV valve to the intake, and a breather for the vent tube.
Bob