Re: Getrag Rebuild Manual - 5 and 6 speed models
[quote=Bret Brinkmann;4364167]Try Mistu parts for the tools. If they can not get them, then try a tool truck like Snap-On or MAC for instance. I use and have had great luck with the Mitsu sealant. I have always used a gray sealant either Mitsu or a brand from the parts store. The key is to use just a thin film. Excessive sealant useage can led to premature failure of bearings, rings, and even cause leaks. (As odd as that sounds.)[/QUOTE
Bumping this one to the top.
Anybody know where to get parts? I've been calling a lot of people with the same results. Kormex doesn't have too much parts anymore, CRS is not building replacement parts anymore, and even Getrag USA doesn't have anything for the 5 or 6 speed anymore.
I am rebuilding a '92 5 speed and I need:
* a set of the 3 synchro rings for 2nd (inner ring had broken in 2)
* rearmost aluminum cover
* one ball and one spring for 1/2 hub and sleeve
If anybody can throw me a hint of who to contact, please let me know.
Andre
|