Quote:
Originally Posted by keithmac
Good results on the Kawasaki!, done`t suppose you know the % water-methanol injected in relation to fuel flow?.
I`ve got the holders scribed up, just need to get busy with the die-grinder..
|
UHmm that could be eazy to figure it out , Im using one 625 ml/min but since im only pushing 5psi at the pumps then the flow will be roughly 114ml/min , I was using 70%meth/30%water but for the last races I used 100% methanol.
The flow of fuel is 53psi and The bike has 8 injectors primaries and secondaries not sure on the flow of each but stock they come with 115rwhp we boosted it u to 235rwhp....
Gil