Re: -= Ultimate Emanage Tuning Thread =-
Here's a speed density map I'm using on my car.
EMU wired to stage 2.5 (Injectors add only).
Injectors: RC550
Stock low/high voltage fuel relay still in place
Stock FPR
Erik Gross hotwire method
Supra Fuel pump
15G turbos
DN Downpipe
Stock catback and catalytic converters
MAF with honey comb screens removed
K&N FIPK
DSM IC
At WOT the AFR is approx 10.7 nice and rich so it should be a safe map to use if your mods are similar enough. I'd recommend leaning it out once you confirm it's okay to extract more HP.
I have this map set to enrich fuel acceleration and pull back some timing during the transition to WOT to combat initial knock that sometimes appears on my car.
For added safety, the AF Target map and I/J fuel map will only add fuel if for some reason your car is lean during WOT.
|
