3000GT/Stealth International Message Center - View Single Post - MAFT Gen 2

Drweldin · 10-07-2007, 11:14 AM

TurboBoB,
Finally got this installed and running, and had a few questions I was hoping you could help with:
1) WB (LC1 ) scaling: I am using MMCD 1.8G, and have it scaled according to that....Gen 2 shows significantly richer....can I get them to match?
2) In config page, option for LS1 "aluminum" exists...does this refer to the metal body Vs. the plastic body types?
3) V1 and V2 out....do these need to be set to a certain voltage? I assume somewhere close to what is in the manual for voltage specs per operating conditions? How do they adjust after that?? I tried to adjust and didnt see any change on the logger, but the car was not running...(?)
4) PLEASE explain the MAF tuning aspect Vs. User Tune...I am totally lost on that one....are they used together?? Or indepentant of each other? If together, is there a better explaination of the parameters, and how to set them?? Take that back -- even if independent, is there a better explaination somewhere??

Thanks much!!

10-07-2007, 11:14 AM	#15 (permalink)
Drweldin Verified Seller Join Date: Jun 2003 Location: Iowa Trader Rating: (99)	Re: MAFT Gen 2 - Anyone? TurboBoB, Finally got this installed and running, and had a few questions I was hoping you could help with: 1) WB (LC1 ) scaling: I am using MMCD 1.8G, and have it scaled according to that....Gen 2 shows significantly richer....can I get them to match? 2) In config page, option for LS1 "aluminum" exists...does this refer to the metal body Vs. the plastic body types? 3) V1 and V2 out....do these need to be set to a certain voltage? I assume somewhere close to what is in the manual for voltage specs per operating conditions? How do they adjust after that?? I tried to adjust and didnt see any change on the logger, but the car was not running...(?) 4) PLEASE explain the MAF tuning aspect Vs. User Tune...I am totally lost on that one....are they used together?? Or indepentant of each other? If together, is there a better explaination of the parameters, and how to set them?? Take that back -- even if independent, is there a better explaination somewhere?? Thanks much!! __________________ 1992 Stealth RT/TT: