Quote:
Originally Posted by oohnoo
Sorry to bring this back from the dead but I got a couple of questions.
I picked up a spare 6-speed and want to do this mod and install this tranny back into my car once my rebuild is finished.
When you sent them the bellhousing did you remove all the gear races/seals or did they do that? And when you put them back in with the shims did you re-check the preload on the bearings to make sure they were still within specs? I'm guessing you installed new seals on it all.
Appreciated
Bob
|
I took them the completely assembled bellhosing and they did the mod. I didn't have to remove anything.
I didn't bother checking preloads. I figured I'd find out soon enough if there were any problems.
