Re: ---===The Official MAFT-Pro Thread===---
Its sort of a to-each-his-own situation.
The MAFT Pro, properly installed, is basically the same sort of deal as a standalone. Each setup has its advantages and dis-advantages.
Both have fuel control and timing control. I don't know if an AEM (not sure which standalone you are considering) has any sort of boost control. Both can log to a laptop...... etc.
Maft pro has keypad tunability, which the standalones do not. So any tweaking or casual monitoring you want to do requires you to fire up the ol' laptop. MAFT Pro (and AEM I think) can be run with the stock MAF. Maft Pro can be run with almost any MAF (GM MAF, blow thru is popular).
Both systems require a certain amount of tuning by the owner. Speed density needs the most tweaking, MAF mode is more straightforward.
Bob
__________________
Need a datalogger? Check out the Scanmaster 3
PM me about ECU mods for 8000+ RPM rev limits !!!!!!!!
Stock = 7300 RPM
Stage 1 = 8060 RPM
Stage 2 = 8200 RPM
Stage 3 = 8400 RPM
Stage 4 = 8800 RPM (By request only)
1991 Stealth RT/TT, Grooms Shortblock, 13G's. <-- Gone but not forgotten
|