3000GT/Stealth International Message Center - View Single Post - -= Ultimate Emanage Tuning Thread =-

BlackStealth · 05-03-2007, 05:27 AM

Actually I recommend making a lot of datalogs using the emanage datalogger on stock injectors as captures at a much higher sampling rate than a OBDI/OBD2 datalogger, although it wouldn't hurt to have both if you already have it. If I still had stock 360cc injectors available to install, I'd reinstall them temporarily just to capture this data and share my findings. This thread is relatively young and I don't know if any new EMU owners had the opportunity to try and datalog stock injectors.

The greddy CEL adaptor is only there to satisfy the ECU injector test. When I had stage 3 wiring + greddy adaptor I had to lean it out at idle a bit.

I wouldn't bother purchasing an OBD2 datalogger as it won't reveal knock on our cars and captures samples way too slow.

05-03-2007, 05:27 AM	#114 (permalink)
BlackStealth Verified Seller Join Date: Apr 2000 Drives: 93 RT/TT Trader Rating: (155)	Re: -= Ultimate Emanage Tuning Thread =- Actually I recommend making a lot of datalogs using the emanage datalogger on stock injectors as captures at a much higher sampling rate than a OBDI/OBD2 datalogger, although it wouldn't hurt to have both if you already have it. If I still had stock 360cc injectors available to install, I'd reinstall them temporarily just to capture this data and share my findings. This thread is relatively young and I don't know if any new EMU owners had the opportunity to try and datalog stock injectors. The greddy CEL adaptor is only there to satisfy the ECU injector test. When I had stage 3 wiring + greddy adaptor I had to lean it out at idle a bit. I wouldn't bother purchasing an OBD2 datalogger as it won't reveal knock on our cars and captures samples way too slow.