3000GT/Stealth International Message Center - View Single Post - -= Ultimate Emanage Tuning Thread =-

BlackStealth · 05-02-2007, 03:00 PM

I use the emanage datalog for tuning as it captures many interesting data samples/sec and I use the OBDI datalogger for monitoring knock only. If my scanmaster flashes a knock value then I know I have to go check my OBDI datalog results.

I don't know why your car eventually runs rich at idle. I was just trying to come up with some ideas. An overrun FPR will cause your car to run rich at idle, so that's why I asked. Post an emanage datalog run and let see if it will reveal anything and make sure your wideband AFR is datalogged too.

-------------
firmware bugs v2.0 and beyond: Has anyone ever bothered to contact greddy and to let them know this is a problem with 6G72 engines? They've apparently fixed the problems for other engine types in v2.12.

05-02-2007, 03:00 PM	#110 (permalink)
BlackStealth Verified Seller Join Date: Apr 2000 Drives: 93 RT/TT Trader Rating: (155)	Re: -= Ultimate Emanage Tuning Thread =- I use the emanage datalog for tuning as it captures many interesting data samples/sec and I use the OBDI datalogger for monitoring knock only. If my scanmaster flashes a knock value then I know I have to go check my OBDI datalog results. I don't know why your car eventually runs rich at idle. I was just trying to come up with some ideas. An overrun FPR will cause your car to run rich at idle, so that's why I asked. Post an emanage datalog run and let see if it will reveal anything and make sure your wideband AFR is datalogged too. ------------- firmware bugs v2.0 and beyond: Has anyone ever bothered to contact greddy and to let them know this is a problem with 6G72 engines? They've apparently fixed the problems for other engine types in v2.12.