3000GT/Stealth International Message Center - View Single Post - Lean Misfires at 2700-2800 rpm

DoctorDex · 03-12-2007, 04:59 PM

Why would it be my bov? I'm using a HKS SSQV and it is supposed to be one of the most sensitive BOVs out there. At one point in time, because of this exact same problem, I modified the bov, by adding an extra nipple, to make it more sensitive. However, because I'm running blow through, I believe there was too much turbulence created by the open bov @ idle. Therefore, I ended up having to cap the extra nipple. I have a feeling the only way I'm going to get a rid of this problem is if I switch to a MAP system or back to a draw through...

03-12-2007, 04:59 PM	#173 (permalink)
DoctorDex Forum Member Join Date: Jul 2005 Location: Edmonton, AB Drives: '91 VR4 - RIP Trader Rating: (17)	Re: Lean Misfires at 2700-2800 rpm Why would it be my bov? I'm using a HKS SSQV and it is supposed to be one of the most sensitive BOVs out there. At one point in time, because of this exact same problem, I modified the bov, by adding an extra nipple, to make it more sensitive. However, because I'm running blow through, I believe there was too much turbulence created by the open bov @ idle. Therefore, I ended up having to cap the extra nipple. I have a feeling the only way I'm going to get a rid of this problem is if I switch to a MAP system or back to a draw through... __________________ '91 VR4 - Rebuild in progress: Mods TBA.