Quote:
|
Originally Posted by FaceGarden
Alright, i got things mostly worked out... The functions are listed in the manual, but not all of the terminology in the manual is the same as the terminology in that diagram, so it wasn't exactly clear to me where things went, even with the manual. Still i reasoned it all out, and i think it's correct, but if i get around to it i think i'm going to make a diagram that's more clearly labeled because if it had been, this would have been a much more straightforward process. Still, i have one wire that i'm unsure of; pin 1 of the 6 pin sensor harness, the red +5v to MAP sensor wire... Where does that go? It seems to be left off the diagram completely...
-Taylor
|
The Red is not typically used on a 3S.
If using the Plug-and-Play Speed Density harness, that harness has a red wire to power the MAP sensor. If using the 2G/3S Speed Density harness, the MAP sensor gets its power from the MAF plug underhood.
Bob