Quote:
|
Originally Posted by Patryn
O.k. with the AEM wideband guage and sensor what wires do I tap into. There are two clusters of wires coming from the guage, the largest of which runs between the sensor and the guage and the other which runs to the power.
edit: Found it, they were the white wire and black wire and just hanging there, right in front of me.
P.S. any of you guys using PTE 880cc injectors. I came up with a mainscale of -59 does that sound along the lines of what others with 880's are using? Car doesn't want to idle until I set the mainscale to -49.
|
These cars like alot of fuel for idling. When you set your mainscale for good idle it usually goes way rich when you press the gas. I usually bump the 600-1200 rpm on low scale a bit, then mess with the mainscale so it's driveable. then tuning begins.