Thanks Alex, but I posted another thread because this one isn't always getting answers right away.
Here is the answer to the madness:
http://www.3si.org/forum/showthread.php?p=4059061
It is spark plug wires which doesn't make sense to me why'd you'd use the word "tension" when referring to a spark plug wire since it carries electricity and isn't being "pulled or tightened up". However since removing the spark plug wires is quite a pain on the rear bank bluemax_1 gave me some other advice to pull the Crankshaft Position Sensor (also referred to as the Crankshaft Angle Sensor: CAS by some) Its CPS in the manual though and thats usually what I stick with which obviously causes me headaches on terminology from time to time.