Re: ---===The Official MAFT-Pro Thread===---
on the 3S, when you set vehicle select to 2, you get to adjust timing from the factory setting. +5 to -10. There is no load threshold or anything yet, it is very much like an ITC, which is why we started there. We may add a load axis at some point, but wanted to get this stuff out on the street as soon as we could.
It works pretty well.
Bob
__________________
Need a datalogger? Check out the Scanmaster 3
PM me about ECU mods for 8000+ RPM rev limits !!!!!!!!
Stock = 7300 RPM
Stage 1 = 8060 RPM
Stage 2 = 8200 RPM
Stage 3 = 8400 RPM
Stage 4 = 8800 RPM (By request only)
1991 Stealth RT/TT, Grooms Shortblock, 13G's. <-- Gone but not forgotten
|