Quote:
|
Originally Posted by TurboBob
The selectable VE tables are not in 4.60, I think 4.63 was the first for that.
When you update versions, you will probably need to re-initialize the unit and then re-configure.
So, hold down the right 2 buttons when powering up until the display says "all data reset!!" It takes about 15 seconds.
Then go thru the config and settings. It should start.
You can download my bin and "Upload" it into the Pro. Its posted here somewhere.
Bob
|
Did the reset, no change, your bin also didn't start, which is funny since I'm using stock fuel right now.....hmmm..
I'll try 4.63.