Quote:
|
Originally Posted by junglesmacks
Ahhhhhhhh it all becomes clear now.. I need the boost harness though.. I didn't get one with my Pro the other day.
OK.. Install done. Setup done. Funky stuff:
Right now I have the stock 360cc injectors in.. So mainscale = 0%. Car will not idle right.. idle goes waaaaaay up and then waaaaay down.. If I bump the mainscale WAY up.. to like.. 35% or so... I can get my idle perfect at a steady 14.7. BUT.. as soon as I start driving it's way rich of course and I can't even boost because it bogs.. I have to dip the mainscale down to like 15% and then I get perfect cruising AFR's.. but a tad bit rich WOT. Come to a stop sign and there it goes again.. idle waaaaay down and then waaaaaay up.
With stock injectors, should I have to even bump up the mainscale so high? I have the settings exactly like what is shown in the quickstart for 3S..
BTW the unit fits decently in the center console.. If only it was like 1/4" narrower it could fit cross ways.. as it is you have to take out the cup/coin holder thing..
|
Do you still have your O2's hooked up? I ended up with 5% mainscale, then I added 16% at 800, 14% at 1200, 10% at 1600, 8% at 2000, and 4% at 2400 in the low trims and my idle is pretty happy right now. I've got about 4% added to my mids from 1200-2400. I'm also pulling fuel ranging from 4% - 14% from 4600-7600. I can't remember my response settings so your on your own there.
