Quote:
|
Originally Posted by KILURV8
According to the install diagram for the 3S, the yellow wire from the 10 pin connector goes to the MAF sensor vehicle harness side. Is there a seperate yellow wire you are talking about?
Also, what settings page do things need to be changed to make match your logger (Tuner Pro RT or on the pro itself)? Sorry for all the questions, you just have me all excited now. Also, is the FMode in supposed to be set to 22 for timing monitor for all 3S cars? And we just need to tap this yellow wire into pin 11 correct?
|
Yes, the MAF wire is going to be used to measure timing. You have to be running speed density for this to work.
There is a base and correction for the timing monitor in the settings page.
the Base us used to make the idle match up, and the correction is used to fix the high RPM. There is some interaction, but its not too tough.
All 3S cars set up the same.
Bob