3000GT/Stealth International Message Center - View Single Post - ---===The Official MAFT-Pro Thread===---

Superjfly · 07-13-2006, 02:17 PM

He is actually right, it is the correct way to do it. You can use a nut as the bung and have the nut welded in. I don't believe it wouldn't have to be aluminum to be welded onto aluminum.

With that being said, if the nut on the inside with an o-ring or some kind of sealant doesn't leak under boost/pressure test, then I don't see why that couldn't be tried first.

07-13-2006, 02:17 PM	#1159 (permalink)
Superjfly Marsupials are FAST!!! Join Date: May 2005 Location: Sheboygan, WI Drives: '92 VR$ Trader Rating: (69)	Re: ---===The Official MAFT-Pro Thread===--- He is actually right, it is the correct way to do it. You can use a nut as the bung and have the nut welded in. I don't believe it wouldn't have to be aluminum to be welded onto aluminum. With that being said, if the nut on the inside with an o-ring or some kind of sealant doesn't leak under boost/pressure test, then I don't see why that couldn't be tried first.