Quote:
|
Originally Posted by Jerggy13
do you have the break down on parts needed to convert to the non abs line?
|
Yeah. Here are all the parts you need from the dealer. Only thing else you need is a prop. valve from an ES model....Its the one with 6 ports on it instead of 4.
The following parts are needed:
MB618846 x1ea - Line from MS to PV
MB618849 x1ea - Line from MS to PV
MB618840 x1ea - Line from PV to RH
MB618843 x1ea - Line from PV to LH <--this one was a royal pain!
MB857842 x1ea - Master Cylinder rebuild kit
MB238309 x2 - Master Cylinder to resivor seals <--also a pain, def
recomend putting a little oil to install seals
All the lines were less than $40 with my good buddy discount. However the rebuild kit was $50 or so. Let me know if you need anything.
Jon