Quote:
|
Originally Posted by Darkangel101010
There is an input and an output, output has to go to turbos. So to answer your question, you are correct there is a T down there
|
i'm mainly asking 'cause in the AEMPro users manual => Boost control section, it shows the "T"d wastegate and turbo pressure vacuum lines going into the
opposite side of the solenoid than shown in the above picture.. it also shows
no vacuum hose connected to the other side.. granted, the manual says the diagram is a "general" setup..
so for clarification:
the hose on the left side of the above pic is the input..
the hose on the right side is the outlet..
and the nipple under the gray foam is the vent..
correct?..