I took my car to the dyno today to get it setup properly and came across a rather confusing problem
We had the VE Table open and the TunerPro software was set to emulate and ALDL was connected. When we made changes to the table we used the "update" button to make the changes to the "black box"
.....everything was working well. Then all of a sudden the update button ceased to work, so we changed to another laptop and that didn`t work either, so we reset the maftpro itself and it still didn`t work....so whats going on? anyone else had this problem?
We worked around it by updating the whole table, rather than individual cells. It has to be said that my car has never driven so smoothly and delivered power as evenly, even with a knackered boost solenoid
My EVC5 has also died, so the car made 275 bhp at the fly and 297 lb/ft torque at .4 bar, so when I sort out the solenoid I`m hoping for some figures in excess of 400bhp...but we`ll have to see....I`d settle for it just the way it is at the moment to be truefull, really nice to drive
Anyone got any ideas how to rectify this or even what I`m on about?
Cheers
Lala