Quote:
|
Originally Posted by RobBeck
I am about ready to order a bulk portion of 4" Aluminum Tubing (have to buy 24-36" length IIRC), and will be cutting cut down into ~3.5" length sections. The wall thickness is closer to .065" and will fit the induction perfectly. PVC is cool as it will work, but the shit is soo thick that you effectively narrow down your inlet about 15mm... which is silly IMHO (100mm vs 85mm). If anyone is interested in the aluminum inserts, I could send out whats extra for ~$10 shipped ea. You just need to then order the 4" flange diameter K&N, apparently the RE-0870 is what I am going to use......
Rob
|
I don't remember what PN my K&N is, but it is the one that fit the LS-1 MAS. I used a piece of 3.5" OD Stainless Steel pipe in the place of the LS-1 MAS and everything has been happy since.
