3000GT/Stealth International Message Center - View Single Post - ---===The Official MAFT-Pro Thread===---

RobBeck · 12-12-2005, 07:16 AM

I am about ready to order a bulk portion of 4" Aluminum Tubing (have to buy 24-36" length IIRC), and will be cutting cut down into ~3.5" length sections. The wall thickness is closer to .065" and will fit the induction perfectly. PVC is cool as it will work, but the shit is soo thick that you effectively narrow down your inlet about 15mm... which is silly IMHO (100mm vs 85mm). If anyone is interested in the aluminum inserts, I could send out whats extra for ~$10 shipped ea. You just need to then order the 4" flange diameter K&N, apparently the RE-0870 is what I am going to use......

Rob

12-12-2005, 07:16 AM	#530 (permalink)
RobBeck POLYCHRONOPOULOS Join Date: May 2002 Location: St. Louis, MO Drives: On 1 Wheel Trader Rating: (224)	Re: ---===The Official MAFT-Pro Thread===--- I am about ready to order a bulk portion of 4" Aluminum Tubing (have to buy 24-36" length IIRC), and will be cutting cut down into ~3.5" length sections. The wall thickness is closer to .065" and will fit the induction perfectly. PVC is cool as it will work, but the shit is soo thick that you effectively narrow down your inlet about 15mm... which is silly IMHO (100mm vs 85mm). If anyone is interested in the aluminum inserts, I could send out whats extra for ~$10 shipped ea. You just need to then order the 4" flange diameter K&N, apparently the RE-0870 is what I am going to use...... Rob