Thread: Baby car seats?
View Single Post
Old 11-15-2005, 05:51 PM   #30 (permalink)
Mikes95RT
Foolish
 
Join Date: Jul 2000
Location: Rock Hill S.C.
Trader Rating: (5)
Mikes95RT Level 1Mikes95RT Level 1
Default Re: Baby car seats?

I didn't read all of this so to those of you who said it won't fit. I call BULLSHIT. I had a small baby when I bought my car. Car seats front or rear facing should be in the center of the rear seat. In other words on the hump. This provides the best protection if you have a side impact. It also allows part of the seat to fit between the two front seats. It will work. I NEVER had a problem going from rear facing to front facing to him out of the seat and old enough to sit in the front seat. I will say it is a PITA if you have to use one seat between two cars.Once you get it in and can leave it in it's OK.If you are trying to put two baby seats in the back of the car then it may be a problem. You may be able to install the rear facing in the center and a front facing behind the pass side if the set is all the way forward.

Good luck. Kids love 3s cars. My on just says Faster Faster.
__________________
Mike Sullivan 95 Stealth FWD TT conversion 10:1 compression@12 PSI
Go...
13c turbos,450cc injectors,
TT pump,3SX braided return line
TurboXS type S open B.O.V.
ATR down pipe

Stuff...
K&N filter,unorthodox U.D.P., Optima red top,
ET performance krank vents
3SX lower poly mounts
Polished y pipe.
cool...
Stock intercoolers,Alcohol injection thanks to turbomirage.com
Tranny...
Auto to 5spd conversion to AWD 5spd/fwd
SPEC Stage 2 AWD clutch 3SX braided clutch line.
Wheels...
Exel Mimi
Fulda extremo 245-40-17
Intrax springs
Control...
Apexi SAFC 2,TT ECU and harness.
TurboXS M.B.C.
M.S.D. Knock alert
Gauges...Autometer...
E.G.T.,Boost,Air/Fuel ratio meter.
13.599@112 at 13psi....traps high enough for 12.3's with the traction for mid 13's..gotta love FWD
All aftermarket parts happily purchased from 3SX performance.com
Turbo conversion parts happily purchased from Mitsuspecialties.
Mikes95RT is offline   Reply With Quote