Re: How to install an Amp on a Stock Infinity System. With pics!
The heat was so oppressive the final goal was to route the wire to an under the dash location and finish the ground wire. This turned into a project as the boost gauge line, boost controller line, boost controller wires, ARC 2 wires, and finally temp sensor wires for the compass, temperature, homelink with maplights mirror were there too. This was a real cluster F… . The wire loom had to be replaced too for the wiring under the hood. So some new 300 degree wire loom was installed. The C F was then cleaned up too.
The best way to run the amp wire was via the old coat hanger trick so I pushed the coat hanger thru the already crowded firewall grommet from the inside taped the wire and pulled it back thru the firewall. Works every time! Finally the amp wire power wire was encased with the loom too.
Pics
__________________
'95 RT/TT Firestorm Red one of 61 MSRP $37,448.72 Digital Climate Control Conversion, Radio Control Addition
DR-500 turbos, Lucas 550's, RPS Max Street Clutch & Flywheel, Tanabe SM Hyper Exhaust, Greddy Denso, ARC-2,
Blitz DSBC, 03 Mitsu Infinity System/in dash 6 Disc Changer Diamond-D971 components, JL e6450 650w 6ch amp
Smokin corner box JL W3. 99 lights & fogs w/Hid's . Bridgestone S-03 Pole Position skins. Member #846 6/01
99SL Black (Deb) The first actual 99 Digital Climate Control Conversion Oct. 04, 05, & 06 Quickening "Best Stock"
Last edited by Dave57 : 07-09-2005 at 03:48 PM.
|