Re: How to: Flush your ATX fluid and change your internal filter
Add some until you can do a flush.
The "you can only change half the capacity" is because the torque converter stays full. There are shops that will actually change that, too, but they cost money. Your best bet is to add fluid to bring up to the full mark(Provided you're using the correct method for checking the level) and then just doing a fluid change when you have time. Even though you'll only be changing half(A bit more than half) you'll be able to clean the pan, those three magnets, and most of the crud that causes problems sinks to the bottom of the pan, or sticks to the magnets anyway.
|