[Dave57]

The OEM tweeters were removed from their housings. If you look at the housing you can see that they melted some of the plastic tabs to mount the tweeters. These tabs come off fairly easy and the original speaker falls out. The cross bars in the oem tweeter housings should be also removed too. The new tweeters came with a plastic cup and a spring steel clip. The pieces were put together and the spring steel clips had to stretched to grasp the oem housing. Then a small dab of black rtv was added to secure the tweeter. The screw in the center was shortened too It's easy to cut. Now the crossovers and speakers had to be connected. The speakers come with the crimp on terminals large for positive and small for negative. I recommend doubling up the wire before inserting and crimping them.