3000GT/Stealth International Message Center - View Single Post - We need a walkthrough for an ATX flush/filter change

BigTyla · 04-28-2005, 10:47 PM

All of those steps are correct. The oil pan is pretty light, but I am Big Tyler so don't take my word for it.

Any ATF-3 will do fine. Don't get anything else unless you want to grenade your tranny.

Also be sure to get a filter kit with a GOOD rubber gasket and not some crappy cork gasket. The filter will look just like the black thing in the picture.

04-28-2005, 10:47 PM	#5 (permalink)
BigTyla Resident rocket scientist Join Date: Nov 2002 Location: Auburn, AL Drives: '93 3000GT ATX TT Trader Rating: (177)	Re: We need a walkthrough for an ATX flush/filter change All of those steps are correct. The oil pan is pretty light, but I am Big Tyler so don't take my word for it. Any ATF-3 will do fine. Don't get anything else unless you want to grenade your tranny. Also be sure to get a filter kit with a GOOD rubber gasket and not some crappy cork gasket. The filter will look just like the black thing in the picture. __________________ Topline Engineering - "Driven to Perfection" 1993 3000GT FWD ATX TT - daily<------------------->1994 Ford Thunderbird LX - wife's Topline Engineering ground wire kit Ground wire GB is back!!!