Ok here is the official work from Autocraft (CRS) as to what is in stock for the 6 speeds:
ALL BEARINGS (tapers and needles...and I do mean every one of them)
ALL SEALS (B06(x2), B07(x2), B31, B66)
comes to a COD total before shipping of $529. This is for the 446 ONLY. I'm sure the 440 will be less, but not by very much. Here is the best way to get a hold of Bill at Autocraft:
Either by phone in the AM hours (8-10am CST) or via fax (405-577-5388). If you know you need a part just fax in the request with your address and the COD method of payment to Bill's attention. It is much faster to do it that way then play phone tag iwth him for a week or more.
Kormex is higher for the seals at $75 for all 6 seals. At this point they are about double (2-21-05).
Update for anyone who is using the 6-speed xls cross reference:
C89,C100, C101 Taper Bearing, MT intermediate shaft is really:
C89 (cone and cup)
C100 (cone)
C101 (cup)
Autocraft is out of the C89, but has both C100 and C101 in stock. This is just for clarification of the short description(s) in the reference.
Thanks for all who have contributed! I am actually starting to look forward to this tear down
