[MilkyClr69]

I had been searching for a full synchronizer set and I stumbled upon the following list. By the way this is for a 5 speed...

Would this list be considered a "complete synchorizer and gasket/sealent list"?

Also, for the "1st/2nd set of three rings", i'm guessing this is just the set of the first 3 items above it? (outer, inner, and blocking rings). Also, it says "Times 2" do we need 2 sets of these???

List:

C46 1st/2nd Outer ring 31.13
C47 1st/2nd Blocking ring 15.03
C48 1st/2nd Inner ring 23.93
C45 1st/2nd Set of three rings 70.09 Times 2????
C11 3rd/4th Synchro ring 22.95
C63 5th Synchro ring 65.40
C74 Reverse synchro ring 68.00
296.53

There are no actual case gaskets. Case joints are filled with sealant, Mitsubishi P/N MD997740.

B06 Output shaft seal 10.25
B07 Driveshaft seal, driver's side 4.60
B31 Driveshaft seal, passenger side 4.40
B32 Oil fill plug 1.18
B33 Oil fill plug gasket 0.05
B52 Oil drain plug 3.08
B53 Oil drain plug gasket 0.05
B59 Rear plug(Input shaft plug) 1.18
24.79




That the complete list?

Thanks