Quote:
|
Originally Posted by skunkworks
This may be coming up faster than I thought. Just ordered 3rd gen lifters and have access to a heated garage. Clint, Where did you end up buying your valve stem seals?
sam
|
I went with Felpro for ~$38.00 from AutoZone. (2 x SS72805)
I went with Felpro not based on lower price but based on their reputation and the possibility that they incorporated newer material/design in their seals. (I believe the Mitsu seals are very likely the same as the original design.)
Removing rocker arms is now the biggest PITA to doing VSS - need to take a look at the Mitsu tool for removing the rocker arms (Current design of my compressor tool cannot be used until after the rocker arm has been removed.)
Clint
__________________
1991 Stealth RT/TT - Firestorm Red - 193K Miles / Original Owner
Maint: Castrol 10W40 / Mitsu Filter / Rislone
Replaced: 2X clutch / 3X brakes / 2X front rotors / 2X ABS HU / 1X NGK Plugs / 1X Ball joints / 2X Antenna mast / 1X Active exhaust cable / 1X Windshield / 1X Fuel FIlter / 1X Struts / 1X rear rotors / 1X Front Head / VSS / 1X rear wheel bearings / 1X Transfer case (warranty) / 1x Tie rod end (drivers side)
Overhauled: Starter, IAC, BISS, CV Boots
Upgrade: SilverStar Headlights / ebay "Xenon" Fog Bulbs (no more yellow!)
A/F Gauge / MAP - Electronic Boost Logging / MMCd Data Logger
Pending Projects: Steering Rack