Re: Don't weld the AWD VCU
sipe16 - I welded the planetary gear to each other AND to the carrier. I had an 18 spline, 25 spline, and six speed in my shop a while ago and all three VCUs looked identicle when I held them up to each other. I was even able to swap output shaft between the three center diff assemblies with no problem. I had thought there would be a difference at least in the 18 splines but perhaps only some of them are different? In any case, all the ones that I have compairedthus far are identicle. I'll see about getting up with Bill at CRS. He has a spread sheet about which parts where changed over the years and when they were changed. Maybe I can get him to fax me a copy and I'll see about posting it. He is hard to get a hold of so no one hold your breath on this.
__________________
When asked what the best thing to come out of Italy is, most Italians will tell you Ferrari.... But if you ask me it was Super Mario Brothers. 
250 RWHP
If you want the exploded views of both 5 and 6 speeds or pics e-mail me at SavagTiger@AOL.com.
94 VR-4 Panama Green Tan Interior
RPS II, gutted cats, flipped BPV, 3SX control arms, 3SX shift bushings, Red Line, Auto-Meter. Rebuilt TC, transaxle, steering rack, heads, and turbos. 360cc's blue printened with in 1%. New short block. RWD convertion and welded rear end.
|