Quote:
|
Originally Posted by samco
|
LOL - "TPI" - Temporary Permanent Install
I'll have to post my "TPI". Given the low mass of the sensor, I didn't bother with the tie-wrap - the sensor is just suspended from the vacuum line.
One note about the Motorolla sensor - probably a good idea to provide some protection against water/oil infiltration. I wash my engine on a pretty regular basis and have not had any problems with the Motorolla sensor with just some electrical tape wrapped around it for protection.
Clint
__________________
1991 Stealth RT/TT - Firestorm Red - 193K Miles / Original Owner
Maint: Castrol 10W40 / Mitsu Filter / Rislone
Replaced: 2X clutch / 3X brakes / 2X front rotors / 2X ABS HU / 1X NGK Plugs / 1X Ball joints / 2X Antenna mast / 1X Active exhaust cable / 1X Windshield / 1X Fuel FIlter / 1X Struts / 1X rear rotors / 1X Front Head / VSS / 1X rear wheel bearings / 1X Transfer case (warranty) / 1x Tie rod end (drivers side)
Overhauled: Starter, IAC, BISS, CV Boots
Upgrade: SilverStar Headlights / ebay "Xenon" Fog Bulbs (no more yellow!)
A/F Gauge / MAP - Electronic Boost Logging / MMCd Data Logger
Pending Projects: Steering Rack