Re: QUick Test
SAMCO
It had been a while since I ran MMCd Tools (for some reason it crashes the Hotsync program after transferring the file is transferred so I uninstlled it.)
SPoulson did a good job of keeping the XLS very general... you have English / Metric and Raw data to work with
Scaling for new sensort types:
3 BAR
BAR = (ADC * 0.0117647) + .1
PSI = (ADC * 0.170632588) - 13.0534
2.5 BAR
BAR = (ADC * 0.0098039) +.1
PSI = (ADC * 0.142193511) - 13.0534
2.0 BAR
BAR = (ADC * 0.0078431) +.1
PSI = (ADC * 0.113755059) - 13.0534
Wideband (0-255 counts = 10-20 AF)
AF = (ADC * .03921569) + 10
Updated version - check out the readability of the numbers in the 8 channel display....
Clint
__________________
1991 Stealth RT/TT - Firestorm Red - 193K Miles / Original Owner
Maint: Castrol 10W40 / Mitsu Filter / Rislone
Replaced: 2X clutch / 3X brakes / 2X front rotors / 2X ABS HU / 1X NGK Plugs / 1X Ball joints / 2X Antenna mast / 1X Active exhaust cable / 1X Windshield / 1X Fuel FIlter / 1X Struts / 1X rear rotors / 1X Front Head / VSS / 1X rear wheel bearings / 1X Transfer case (warranty) / 1x Tie rod end (drivers side)
Overhauled: Starter, IAC, BISS, CV Boots
Upgrade: SilverStar Headlights / ebay "Xenon" Fog Bulbs (no more yellow!)
A/F Gauge / MAP - Electronic Boost Logging / MMCd Data Logger
Pending Projects: Steering Rack
|
