Last Update: January 24, 2008
Jacks Transmissions/
Has or can get any new tranny parts. Rebuild services also available. Best reached by PM. User name JackM on 3Si.
www.jackstransmissions.com
Kormex
Supplies rebuilds, used and new parts, torsen front LSD, as well as 6 speed JMD gears. They do trannys and TCs.
Kormex on 3Si
800-429-5464
3SX Performance
Call the service department for tranny and TC rebuilds.
Contact me at the service department for new and used tranny and TC parts.
Supplies the SS TC housings.
704-784-DRAG
3SX Performance Automotive - Mitsubishi 3000GT & Dodge Stealth Performance Specialists - Parts + Service
All Trans Parts
800-237-8601 Ask for Ed.
They have many parts in stock for a limited time only. The catch is that they will only deal with shops and not individuals. I have had a hard time getting these guys to call me back when they have to go check their invintory. Ed seems to be about the only person there that will call me back, ask for him.
Applied Industries
Locate a dealer near you using this link.
Company Information | Applied.com
All of our tappered roller bearings can be found at Applied Industrial Technologies. They will be able to get the roller bearings in the transaxles and TCs so long as you have a number off of the race for them. The only exception is the bell housing side input shaft bearing. These have proven to be very difficult to locate. Find a dealer near you. They were much cheaper than most vendors and are an authorized distributor for Timken and Torrington bearings. Here are the numbers for the roller bearings. All are the same for both 5 speeds (440) and 6 speeds (446) except for the counter shaft bearing on the end cover side. Most parts stores such as Auto Zone can also get these bearings.
Bell housing side / End cover side
Input shaft 308-410 / 574976
Counter shaft 30209 / 30207(440) or 30208(446)
Center diff 32010 / 32009
Pinion shaft 32009 / 32009
Front diff 32008 / 32009
Mark Williams Enterprises
18/25 spline 300m output shafts and 25 spline 300m TC spools
Contact Travis @ MW enterprises 800-525-1963
Mark Williams Enterprises- Homepage
[b]Pampena Motorsports[B/]
Supplies 6 speed bell housing braces and brace installation services. Braces for the 5 speeds coming soon.
>>>> Pampena Motorsports <<<
EK2 Manufacturing
5 speed TC cage
PM Bob, his user name is ek2mfg.
Super Car Engineering
Billet 6 speed 1/2 and 3/4 shift forks, front and rear LSDs, 300m output shafts, stock replacement output shafts and TC spools, input shaft bearing in the bell housing, seals, rooler bearings, 1/2 friction rings, and soon to come center LSD.
Supercar Engineering
LSE Performance
They carry the cast stainless steel TC housings.
http://www.lseperformance.com/newproducts.html
763-416-DYNO
North Bend Tech
NBT produces the 25 spline quadco XR steel output shafts with anti-rust/corrosion coating on splines and billet 5 speed 1/2 and 3/4 forks. Spools soon to come. Rebuild services available. Used parts may be available.
PM DarkHelmet for possible rebuild services and/or parts.
Northbend Technologies LLC.
PO Machine
Contact John Redgate for 6 speed bell housing reinforcement.
520-888-4010
AutoCraft
AutoCraft (formally known as CRS) no longer has the service contract for these trannys. Parts are no longer available through them.
Evil Empire Performance
Evil Empire Performance
Supplies many but not all new tranny parts. They are in the UK so expect high shipping cost.
Ralli Art 3000GT
A 3Si member who can get new tranny parts. PM for pricing.
Don't forget about your fellow 3/S members out there who may be parting out a tranny/TC. It is a good way to get used parts (but still perfectly good parts) even cheaper.
Here is a link to everything you will need to know about your AWD drivetrain. Just read the first post and follow the links. It will be continually updated as more information is available.
Everything you need to know about your AWD drivetrain. - 3000GT/Stealth International Message Center
Here is a link where the Getrag 440 (five speed) and 446 (six speed) transaxle rebuild manual is posted. You can down load a free copy from the first post of this thread. Special thanks to Gatecrasher and all who helped him in translating it from Japanesse.
Getrag Rebuild Manual - 5 and 6 speed models - 3000GT/Stealth International Message Center
End update
I just got off the phone with Gloria at CRS. They no longer have in stock several of the Getrag 440/446 parts that many of us need and she tells me even more parts will become hard to find. The reason? CRS is not a parts supplier but a remanufacturing company under contract with Mitsubishi. Mitsubishi asked them to sell us parts so we wouldn't have to buy a new $6K transaxle. (Not a financial option for a lot of us.) CRS has been a wonderful help (as well as Kormex) but unfortunately they can only do so much for us. They don't have any plans on ordering more parts to keep in stock because they rebuild so very little of them. (Mitsubishi gets very few orders for "new" transaxles.)
Six thousand dollars will total most cars out there. If not then it leaves the owner no choice but to part out the car. When this happens Mitsubishi and Getrag do not make any money. If they offered parts Getrag could make money off of selling parts to us and the dealership and Mitsubishi could make money off of parts mark up and labor. But if we have to part out or total our car and get a new one neither Mitsubishi or Getrag make money.
Their is money to be made here guys. Where there is money to be made there is an oppertunity for us to get a parts supplier. Any body have any ideas? Can any one in MI get me the number for Getrag's office? Any one know who I have to call on the Mitsubishi side to get the ball rolling?