View Single Post
Old 08-21-2003, 06:30 PM   #237 (permalink)
Innovator
Blowing hot air
 
Innovator's Avatar
 
Join Date: Aug 2001
Location: Albany NY
Trader Rating: (6)
Innovator is an unknown quantity at this point
Default

Quote:
Originally posted by wizard
ok i think its time 2 get this thread back on track:

let me just TRIPPLE check everything here:
1. remove the 2 side and bottom honeycombs.
2. add approximately 10% to the afc
3. raise the idle of the afc all the hell way to about +15% (even on 550's?)


this sound about right to you?
the reason i'm willing to try this mod is b/c w/ the new 550's my timing is in the 30-35's at WOT, and knock is WAYYYYYY up in the 28 counts, for all o2 readings..

btw, when i leaned out the fuel too much, i was hearing some weird grinding sounds coming from the engine... this normal?
Grinding sounds Don't lean it out too much!
__________________
Broadway Auto Clinic..Home of Big Dicks Performance

Rick@broadwayautoclinic.com

518-434-4077



http://www.BroadwayAutoClinic.com

http://www.BigBoysFastToys.com

19T turbos from Blouch Turbo**DR Stage Three Heads** Pauter connecting rods**Wiseco Forged Pistons**New OE forged crank** Nissan connecting rod bearings**32X15X3.5 FMIC and 2.5" hardpipes**TANABE SUPER MEDALION RACING HYPER exhaust**custom downpipe**ACPT 1 piece drive shaft** RPS Stage Three Clutch** Emange Blue and EO1 piggyback** Koyo 2" aluminum radiator**Denso 660 injectors** Greddy 60MM gauges in every flavor**FJO wideband**Dawes Twin AF gages**water cooled oil cooler** H&R lowering springs and ne OE struts**5Ziggen 18X8.5 FN1OC Gunmetal wheels**Goodyear F1 tires**etc,etc
Innovator is offline   Reply With Quote