View Single Post
Old 08-21-2003, 06:37 AM   #225 (permalink)
Innovator
Blowing hot air
 
Innovator's Avatar
 
Join Date: Aug 2001
Location: Albany NY
Trader Rating: (6)
Innovator is an unknown quantity at this point
Default

Quote:
Originally posted by Multiades
Excellent. Overall I hope this thread will be informative for others -- I think this mod has very real benefits for improving airflow through the MAS and allowing for more air to be metered (peak).

I'm probably just going to do a cheap MAF upgrade rather than play around with the honeycombs, because un-smoothed airflow could cause metering inaccuracy or inconsistency and I'd rather have my tune stay put.

EDIT: My figures above are a little rough for simplicity, 550cc/min injectors are actually ~52.77% larger than stock, but who's counting.

-Chris
I've tuned it for a flat 12:1 until 5K where I tuned it for a flat 11.5:1, and there is not any inaccuracy or inconsistency in the A/F. Maybe .2 at the most which may be just my foot not depressing the pedal all the way at all times..
__________________
Broadway Auto Clinic..Home of Big Dicks Performance

Rick@broadwayautoclinic.com

518-434-4077



http://www.BroadwayAutoClinic.com

http://www.BigBoysFastToys.com

19T turbos from Blouch Turbo**DR Stage Three Heads** Pauter connecting rods**Wiseco Forged Pistons**New OE forged crank** Nissan connecting rod bearings**32X15X3.5 FMIC and 2.5" hardpipes**TANABE SUPER MEDALION RACING HYPER exhaust**custom downpipe**ACPT 1 piece drive shaft** RPS Stage Three Clutch** Emange Blue and EO1 piggyback** Koyo 2" aluminum radiator**Denso 660 injectors** Greddy 60MM gauges in every flavor**FJO wideband**Dawes Twin AF gages**water cooled oil cooler** H&R lowering springs and ne OE struts**5Ziggen 18X8.5 FN1OC Gunmetal wheels**Goodyear F1 tires**etc,etc
Innovator is offline   Reply With Quote