3000GT/Stealth International Message Center - View Single Post - Getting the most out of your Apexi S-AFC= Stock MAF honeycomb removal

Import Power · 08-11-2003, 08:44 PM

I put in 780s after I would hit 96-97% IDC on the 550s

Here is a log I ran today.
ArcII 87mm
780 PTE injectors
propane

Running 20psi on this run
WOT on 2nd and 3rd

Notice timing at the end of 2nd hits 39 and no knock and 3rd gear pull is damn close to that. IDC of 70%

I know O2s are 98 but with propane O2s seem to run higher on the O2 sensor and runs great on my car.

08-11-2003, 08:44 PM	#113 (permalink)
Import Power Corn Its whats for boost Join Date: Jan 2002 Location: Behind the Wheel Drives: Vicki Insane Trader Rating: (209)	I put in 780s after I would hit 96-97% IDC on the 550s Here is a log I ran today. ArcII 87mm 780 PTE injectors propane Running 20psi on this run WOT on 2nd and 3rd Notice timing at the end of 2nd hits 39 and no knock and 3rd gear pull is damn close to that. IDC of 70% I know O2s are 98 but with propane O2s seem to run higher on the O2 sensor and runs great on my car. __________________ AEM Factory Trained Tuner 91VR4 Black-5027s-3.0L-Stock heads and Cams- 707AWHP 620AWTQ uncorrected 30psi E85 Daily Driver SLTT-10.9 @ 140MPH Stock NA motor and NA heads/Cams T4 AWD 9.21 @ 154.98 T2 FWD 10.19 @ 140.31 T4-159.23 MPH Ran on 6G72 3.1L! T4-995AWHP Uncorrected 6G72 3.0L C16 T2-820FWHP 3.1L 27psi C16 91VR4 Red-17Gs w/supporting mods-sold 93SLTT/T2 91VR4 Pearl White-sold 91VR4 Black-sold 92VR4 Sandstone-sold 94VR4 Green-sold 93VR4 Pearl White-sold 3SX Performance 3SX Performance Service Email