Quote:
Originally posted by slava
jeff, how exatly simulator is pluged in?
|
The simulator is wired into the O2 Sensor wiring. The O2 is cut out and just the connector and wiring is used. I'd rather not cut into the factory harness just I case ever wanted to switch back to stock. The 12V for the heater powers the sim, the heater ground is sim ground, and the sim output connects to the sensor signal back to the ECU. The resistor is across the 12V heater lead and heater ground. the sim's are about 2x0.75x0.5 in in size. I'd contact Casper's directly if you're interested in buying, his prices was better than dealers when I bought them.
I would rather not drive with the CEL on, a real problem could develop the the CEL could alert me about before it caused damage. Just my personal belief.
Hope this answers your question.
Jeff